pt

Blog de luckhoney

For sand and gravel factories, there are many types of common 100th small sand making machine, and they are indispensable equipment in the sand and gravel production line, and their use frequency is relatively high. However, in the process of operation, these equipment is also invisible manufacturing pollution, especially the noise and dust in the operation of sand machine will greatly endanger the health of workers and seriously pollute the working environment.

Traditional sand-making machines are available in almost every sand-stone factory, especially for some small-scale sand-stone factories, which require higher productivity of sand-stone materials. They will rotate continuously, but you may not know that this will bring greater health hazards to the workers.

Compared with the traditional sand machine, the new 100th small sand making machine has more remarkable environmental protection effect and better operation effect. And more respected in the market. Why is it so different?

1. low carbon, environmental protection, no dust.

Compared with the traditional stone sand making machine, its structure and performance have been improved and upgraded. Therefore, the operation in the process of operation is more stable and reliable, the processing capacity is larger, the output is high, the energy consumption is low, the noise is small, and there is no dust. It completely achieves the effect of low carbon, low consumption, energy saving and environmental protection.

2. Low cost and good performance.

For many users, choosing and purchasing high-quality and low-cost 100th small stone sand making machine is the pursuit of everyone, but now the price of 100th small stone sand making machine is also very economical and affordable, not only the equipment price is low, but also the operation cost in operation is low, which can save cost input for users better, and its quality is very good. It is guaranteed.

Under the general trend of energy saving, environmental protection and green operation, the new 100th small stone sand making machine is more and more respected by the vast number of users, and has brought considerable economic benefits to users. Its quality, performance and other aspects can be greatly higher.

Raymond mill is a common powder equipment in industrial production enterprises. As one of the high-fineness powder machines, Raymond mill has a high working strength and a high probability of wear and tear in each operation. The wear condition of Raymond mill directly determines its working efficiency, so it is very important to check whether the working state of Raymond mill is stable or not.

1) According to the output and quality judgment of Raymond mill, the correct ball matching scheme can achieve high quality, high yield and low power consumption.

2) check the material in grinding mill of Raymond mill. Under normal operation, the Raymond mill is stopped to check the grinding condition. When the filling rate is normal, the exposed material covering layer of the larger steel ball occupies 1/2-1/3 of the diameter of the steel ball, and the thickness of the material covering the grinding body of the second bin is 20 mm. If too many steel balls are exposed, it means that the diameter of steel balls is too large, or the filling rate is too large, otherwise, it means that the diameter of steel balls is too small or the loading capacity is insufficient. If the two storages are too thick, the filling rate is not enough. Conversely, the loading capacity is too high. In addition, the determination of the ratio of material, ball loading and water inflow of Raymond mill is also helpful to the normal operation of Raymond mill.

3) Listen to the sound. Under normal feeding conditions, the impact of a steel ball in a bin is stronger, and there is a "clatter" sound. If the impact sound of a steel ball in a warehouse is particularly loud, it means that the average diameter of a steel ball in a warehouse is too large or the filling coefficient is too large; if the sound asks, it means that the average diameter of a steel ball in a warehouse is too small or the filling coefficient is too low, then the average diameter or filling rate of the steel ball should be increased. When the two warehouse is normal, a slight "brushing" sound of the abrasive body can be heard.

Raymond mill is a common powder equipment in industrial production enterprises. As one of the high-fineness powder machines, Raymond mill has a high working strength and a high probability of wear and tear in each operation. The wear condition of Raymond mill directly determines its working efficiency, so it is very important to check whether the working state of Raymond mill is stable or not.

1) According to the output and quality judgment of Raymond mill, the correct ball matching scheme can achieve high quality, high yield and low power consumption.

2) check the material in grinding mill of Raymond mill. Under normal operation, the Raymond mill is stopped to check the grinding condition. When the filling rate is normal, the exposed material covering layer of the larger steel ball occupies 1/2-1/3 of the diameter of the steel ball, and the thickness of the material covering the grinding body of the second bin is 20 mm. If too many steel balls are exposed, it means that the diameter of steel balls is too large, or the filling rate is too large, otherwise, it means that the diameter of steel balls is too small or the loading capacity is insufficient. If the two storages are too thick, the filling rate is not enough. Conversely, the loading capacity is too high. In addition, the determination of the ratio of material, ball loading and water inflow of Raymond mill is also helpful to the normal operation of Raymond mill.

3) Listen to the sound. Under normal feeding conditions, the impact of a steel ball in a bin is stronger, and there is a "clatter" sound. If the impact sound of a steel ball in a warehouse is particularly loud, it means that the average diameter of a steel ball in a warehouse is too large or the filling coefficient is too large; if the sound asks, it means that the average diameter of a steel ball in a warehouse is too small or the filling coefficient is too low, then the average diameter or filling rate of the steel ball should be increased. When the two warehouse is normal, a slight "brushing" sound of the abrasive body can be heard.

Arquivos